Thread lace and beads

Oh my word–making huge pieces of thread lace is a never ending project! I’ve never made anything but some small leaves before and making this huge sheet is taking way too long. If I had known at the beginning….in the category of  lessons learned, I’d really have gone about it in a different way.

My goal was to create sheer, shiny fabric to attach to the silk background already made. It would need to have beads on it, but those could be supported by a grid of beading thread as the beads were added. Okay–that was the plan. Using up tons of fibers and threads seemed like such a bonus, too.

I wasn’t too far into it before I realized that the threads alone would not create a strong enough fabric.

Adding a sheer fabric back was about the only answer I could come up with. Had I started with the fabric, I would have added light fusible and fused those fibers to it. Still would have added the stabilizer and the stitching, but maybe not as much stitch and maybe not so many thread/stitching frustrations. Next time for sure…

I stitched for hours, free form sewing and finally thought it might hold together. Then I added a grid of stitches just to feel better about it!

And suddenly it was time to bite the bullet, call it good and wash away the stabilizer!

It’s sheer, shiny and looks different from every angle. Can’t really show that in photos, but I think it’s going to work. We’ll judge the strength as I start assembling and adding those heavy beads!

Speaking of which…I have a few choices to make!

I always start by pulling anything that I think might have any possibility of working with my fabrics and colors…and because I have accumulated so many beads, that can become a large pile!

 

I almost immediately eliminated the darker gold beads and the darkest blue beads. The thread fabric changes color with every viewing angle, so most any color should work! I thought about green, but didn’t really have a good green jump out at me.

  

These three were ‘finalists’ and all looked pretty good. Then I kind of thought all white would really be best and spread these out.

The white along with some off-white looks like the solution. Sparkle all the way through and no dramatic color to draw the eye. The piece is going to reflect a snow storm, so the whiter the better………………..I think! It may yet change as I progress with the beading, but that’s the plan right now.

And I got to spend the whole day in the studio! Thought I was going to have most of the week in the studio, but I forgot to put several things on my calendar. So I’m extra grateful to have had today and to have progressed so far. There is no ‘fast’ in this project, so I will either post it so much that you will get sick of it, or I will try to restrain myself and there will not be as many posts.

But I know myself well enough to know that I will work on more than one project at the same time, so there should be something else to look at soon!

 

Advertisements

6 thoughts on “Thread lace and beads

  1. oh I have that sheer and use it a lot. This is time consuming but now you’ve got a grand piece of art to play with, Can’t wait to see all the ways you use it. Just don’t iron it… ask me how I know…

    Like

    • I was just at the gym and I spent the whole time thinking and planning next steps! I’ll bring what I have on Thursday…and again when it gets done, sometime in the future!!

      Like

Comments are closed.