Spring and batiks–right?

My new stashbuster project was inspired by a photo that I backtracked to a free pattern. Now I know you all will want to know which pattern, so here’s the link  Kite Flight  by Robert Kaufman and it’s a beginner friendly, strip pieced pattern.

Easy to make the strip sets, of course, and I was eager to see how the actual measurements and instructions work on my machine, in real life! The assumption with jelly rolls is that the strips are all at least 42″ long and of course that’s not always true. It also assumes that your seam allowance is sewn exactly like theirs. The pattern cautions that there is not waste, which means ‘be careful or you’ll run out of fabric.’

I used my fast stitch machine and I know that the 1/4″ I sew on that machine is a scant 1/4″.  And I used the very edge of the pinked cut as my edge. And the instructions said to press all the seams open…………..fat chance! I am not going to spend forever picking open those pinked edges on a 5 strip set! I just pressed them out each way from the center strip. If it’s an issue later in the construction, I’ll figure it out and deal with it then.

It came out as a skinny 10 1/2″ strip set. If you are a beginner, and yours comes out a touch small, don’t panic! The next step is to cross cut into squares, so you make your squares the same size as your strip set. The objective is to make the square! If it’s 10 1/4″ instead of 10 1/2″, there may be some other adjustment needed later on, but for this pattern it’s more important that it be square.

I certainly did not mean this post to be all about the pattern instructions, because they are fine. This is to reassure you that perfection is not always necessary to achieve great results. And for me, the goal is to use up the stash, not produce an heirloom masterpiece! I quilt for fun, aim for precision and don’t stress over any part of it. My favorite quilt teacher said that fabric is forgiving and it’s a statement that I’ve lived by as I work with textiles.

Now, about that 42″ WOF measurement…so far, so good, by measuring carefully. But how to avoid panic and having to make more strip sets if these are short? I decided while I was sewing them together that it’s a scrap quilt. If it was short I was simply going to add a piece of fabric on the end and cut out the square. In a different situation, I would make more strip sets or seam the ends of the ‘short ones’ together to make large enough blocks.  (And that may yet happen!) I’ve only cut one set so far, but this is what I had left!

I hope all the other strips work as well! I’m eager to keep going on this one. It should be quick and I’m liking those strip sets, so I’m positive I’ll like the finished quilt.

I have to tell you once again, I am having so much fun working on these stashbuster projects! And getting an actual, useable end product is a big bonus!

Quilt on………………..

 

 

Advertisements